Saturday, October 24, 2009

Scan vs Photo



Recently Ruth and I have been in image capture hell. Or, to put it more mildly, we have learned a lot about what makes a good image capture. Here are two examples showing side by side crops at 100%. These are Ruth's original oil paintings on paper. They are about 25" x 15" overall. We need to capture for Ruth's upcoming book Lonely Bird's Friend. Of course it's obvious that a scanner is going to have higher quality than a camera if it is possible to use a scanner in a given situation. This experience really drives it home though.

Prior to seeing the scans, we were blown away by the image quality from our recent shoot on the Nikon. The right hand frame on each image here is from my Nikon D90 with a 50mm prime at f5.6 on a tripod and using diffused halogen lights. The left side is from a sheetfed scanner at 600 dpi, the right side is from the nikon at 300 dpi and 12 megapixels. To compare, the nikon's raw images are about 12-15 megabytes. The scans are 376 megabytes. So what's the catch? The scanner at our print shop is perfect in every way except it leaves banding and lines in the images making them unprintable–we think the scanner is out of adjustment. We go for an appointment next week to another print shop to try another scanner. High hopes for it.

Tuesday, October 20, 2009

Good advice, for some.


Don't fly kites near power lines. It is pretty good advice. Like many rules however, some can be bent, others can be broken. We often fly in our front yard. It has some really beautiful lines right above it. Getting close to them can be really photogenic.
Tim Elverston Ruth Whiting Lacewing Flame Kite
Tim Elverston Ruth Whiting Lacewing Flame Kite
Tim Elverston Ruth Whiting Lacewing Flame Kite

Ruth in the studio - nearing completion of the book


These are among the final images which have to be done to complete Ruth's book - Lonely Bird's Friend


Sunday, October 18, 2009

Finished lamp - carbon, stainless, spectra, cuben fiber



The makings of a counterweighted lamp

Two weeks ago I made this lamp. I'm working on the second. This one has a wooden base, the next one will be all carbon. This is a wall-mounted lamp that is counterweighted so it can be adjusted with two fingers to go anywhere within the 5 foot radius. It started with an idea for a bent wire junction.